产品标准
本产品按GB12706《额定電压35kV及以下铜芯、铝芯塑料绝缘電力電缆》和GB12666《電線電缆燃烧实验方法》标准生产，同时还可根据用户需要按******電工委员会推荐的IEC标准、英國BS标准、德國DIN标准、美國ICEA标准及日本JIS标准生产。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.
适用范围
本产品适用于工频额定電压0.6/1kV及以下配電線路或工业装置中有耐火要求的固定敷设场所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.
使用特性
·工频额定電压U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·電缆导體的***高允许長期工作温度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路时（***長持续时间不超过5s）電缆导體***高允许温度
PVC:导體截面≤300mm2-160℃
导體截面＞300mm2-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm2-160℃
cross-section of conductor＞300mm2-140℃
XLPE:250℃
·電缆敷设时环境温度应不低于0℃
The ambient temperature under installation should not below 0℃
·電缆的弯曲半径：多芯電缆不小于電缆外径15倍，单芯電缆不小于電缆外径20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter. |
